Siemens SINUMERIK 840D sl Operating Manual page 140

Program management
8.9 Templates
Storage location for templates
The templates used to create part programs or workpieces can be stored in the following
directories:
HMI Data/Templates/Manufacturer/Part programs or Workpieces
HMI Data/Templates/User/Part programs or Workpieces
Proceed as follows
See also
Creating a new workpiece (Page 131)
Creating a new G code program (Page 132)
140
1. Select the "Program manager" operating area.
2. Press the menu forward key and the "System data" softkey.
The data tree opens.
...
3. Position the cursor on the file that you want to store as a template and
press the "Copy" softkey.
4. Select the folder in which you want to store the file - "Part programs" or
"Workpieces" - and press the "Paste" softkey. See "Storage locations
for templates"
Stored templates can be selected when a part program or a workpiece
is being created.
Operating Manual, 11/2006, 6FC5398-6AP10-1BA0
HMI sl Universal