Replacing Program Text - Siemens SINUMERIK 840D sl Operating Manual

Further search options
Softkey
3.8.3

Replacing program text

You can find and replace text in one step.
Requirement
The desired program is opened in the editor.
Proceed as follows
HMI sl Universal
Operating Manual, 11/2006, 6FC5398-6AP10-1BA0
Function
The cursor is set to the first character in the program.
The cursor is set to the last character in the program.
1. Press the "Search" soft key
A new vertical softkey bar appears.
2. Press the "Find + replace" softkey.
The "Find and replace" window appears.
3. In the "Text" field, enter the term you are looking for and in the
"Replace with" field, enter the text you would like to insert
automatically during the search.
4. Place the cursor in the "Direction" field and choose the search
direction (forward, backward) with the "SELECT" button.
5. Press the "OK" softkey to start the search.
If the text you are searching for is found, the corresponding line is
highlighted.
6. Press the "Replace" softkey to replace the text.
- OR -
Press the "Replace all" softkey to replace all text in the file that
corresponds to the search term.
- OR -
Machine the workpiece
3.8 Editing programs
73