Display Current Program Block; Current Block Display; Display Program Level - Siemens SINUMERIK 840D sl Operating Manual

See also
Selecting a program (Page 59)
3.3

Display current program block

3.3.1

Current block display

The window of the current block display shows you the program blocks currently being
executed.
Display of current program
The following information is displayed in the running program:
• The workpiece name or program name is entered in the title row.
• Three blocks of the current program are displayed.
• The program block which is just being processed appears colored.
3.3.2

Display program level

You can display the current program level during the execution of a large program with
several subroutines.
Display of program level
The following information will be displayed:
• Level number
• Program name
• Block number, or line number
Requirement
A program must be selected for execution in "AUTO" or "MDA" mode.
HMI sl Universal
Operating Manual, 11/2006, 6FC5398-6AP10-1BA0
5. Press the "SINGLE BLOCK" key again, if the machining is not
supposed to run block-by-block.
The key is deselected again.
If you now press the "CYCLE START" key again, the program is
executed to the end without interruption.
Machine the workpiece
3.3 Display current program block
61