Typical Deployment; Odu With Poe Interface To Psu - Cambium Networks PTP 650 Series User Manual

Chapter 3: System planning

Typical deployment

Typical deployment
This section contains diagrams illustrating typical PTP 650 site deployments.

ODU with POE interface to PSU

In the basic configuration, there is only one Ethernet interface, a copper Cat5e power over Ethernet
(POE) from the PSU to the ODU (PSU port), as shown in the following diagrams: mast or tower
installation (Figure 23 ), wall installation (Figure 24) and roof installation (Figure 25).
Figure 23 Mast or tower installation
Page
3-2