Step 3: Snmp User Policy Configuration (For Snmpv3) - Cambium Networks PTP 650 Series User Manual

Chapter 6: Configuration and alignment

Step 3: SNMP User Policy Configuration (for SNMPv3)

Menu option: Management > SNMP. Part of the SNMP Wizard
This page is only displayed when SNMP Security Mode is set to Web-based in the Step 1: SNMP
Configuration page. Use this page to configure which authentication and privacy protocols are
required for SNMP users with roles System administrator and Read only.
Procedure:
•
Update the attributes
•
Click Next.
Figure 87 Step 3: SNMP User Policy Configuration page (for SNMPv3)
Table 89 Step 3: SNMP User Policy Configuration attributes (for SNMPv3)
Attribute
Security Level
(Table 89).
Meaning
Defines the security level and associated protocols that are required to
allow SNMP users to access the PTP 650.
No Auth No Priv: Users are not required to use authentication or
privacy protocols.
Auth No Priv: Users are required to use only authentication protocols.
Auth Priv: Users are required to use both authentication and privacy
protocols.
Page
(Figure 87).
6-65
SNMP pages (for SNMPv3)