Table of Contents
Advertisement
Chapter 6: Configuration and alignment
Installation menu
This section describes how to use the Installation Wizard to complete the essential system
configuration tasks that must be performed on a new link.
Caution
If the system designer has provided a list of channels to be barred for TDWR radar
avoidance, the affected channels must be barred before the units are allowed to
radiate on site, otherwise the regulations will be infringed. To bar these channels,
follow the procedure
Starting the Installation Wizard
To start the Installation Wizard: on the menu, click Installation. The response depends upon the
state of the unit:
•
If the unit is newly installed, the Software License Key page is displayed. Continue at
License Key page
on page 6-12.
•
If the unit is armed for alignment, the Disarm Installation page is displayed. Continue at
Installation page
on page 6-11.
•
If the unit is not armed, the Current Installation Summary page is displayed. Continue at
Current Installation Summary page
Barring channels
on page 7-31.
on page 6-11.
Page
6-10
Installation menu
Software
Disarm
Advertisement
Table of Contents
