Chapter 6: Configuration and alignment
Step 6: Enter Wireless Link Encryption Key
Menu option: Security. Part of the Security Wizard
Use this page to enable AES encryption and enter the encryption key. The wireless link encryption
key is used to encrypt all traffic over the PTP 650 wireless link.
Figure 100 Step 6: Enter Wireless Link Encryption Key page
Procedure:
•
Select the applicable value in the Encryption Algorithm field. If a valid encryption key exists,
then an SHA-1 thumbprint of the key is displayed. If this key is correct, then take no action.
Otherwise, enter the generated key in the Wireless Link Encryption Key and Confirm Wireless
Link Encryption Key fields.
•
Click Next.
(Figure
100).
Page
6-82
Security menu