Connecting The Cable - Cambium Networks PTP 650 Series User Manual

Chapter 5: Installation

Connecting the cable

Caution
The fiber optic cable assembly is very delicate. To avoid damage, handle it with
extreme care. Ensure that the fiber optic cable does not twist during assembly,
especially when fitting and tightening the weatherproofing gland.
Do not insert the power over Ethernet drop cable from the PSU into the SFP module,
as this will damage the module.
1 Remove the LC connector dust caps from the ODU end (optical cable only):
2 Plug the connector into the SFP module, ensuring that it snaps home:
Optical Copper
Page
5-29
Installing an SFP Ethernet interface