Typical Bridge Deployment - Cambium Networks PTP 650 Series User Manual

Chapter 1: Product description

Typical bridge deployment

The PTP 650 is an "all outdoor" solution consisting of a wireless bridge between two sites. Each
site installation consists of an integrated or connectorized outdoor unit (ODU) and a power injector
(PSU) (Figure 1). The ODU provides the following interfaces:
•
PSU port: This provides proprietary power over Ethernet and connection to the management
and/or data networks via 100BASE-TX or 1000BASE-T Ethernet. In the basic configuration, this
is the only Ethernet connection to the ODU.
•
SFP port: This provides an optical or copper Gigabit Ethernet interface for out-of-band local
management, user data or user data with in-band management.
•
Aux port: This provides an optional power and 100BASE-TX or 1000BASE-T Ethernet
connection to an IEEE803.2at device such as a video camera or wireless access point.
Figure 1 PTP 650 typical bridge deployment
Page
1-4
Overview of the PTP 650