Table of Contents
Advertisement
Chapter 6: Configuration and alignment
Procedure:
•
Set SNMP State to Enabled.
•
Set SNMP Version to v1/2c. The page is redisplayed with SNMPv1/2c attributes.
•
Update the attributes
•
Click Next.
Table 92 Step 1: SNMP Configuration attributes (for SNMPv1/2c)
Attribute
SNMP Minimum
Privilege Level
SNMP State
SNMP Access
Control
SNMP Access
Control Internet
Address 1/2/3
SNMP Version
SNMP Community
String
SNMP Port Number
Step 2: SNMP MIB-II System Objects (for SNMPv1/2c)
Menu option: Management > SNMP. Part of the SNMP Wizard
details of the SNMP managed node. Update the attributes
(Table
92).
Meaning
Minimum security level which is permitted to administer SNMP security
settings.
Only displayed when Identity Based User Accounts are Enabled on the
User Accounts page
(Table
Enables or disables SNMP.
Enables or disables access control to SNMP management by IP address.
A list of up to three IPv4 or IPv6 Addresses permitted to perform SNMP
management.
Only displayed when SNMP Access Control is set to Enabled.
SNMP protocol version: v1/2c or v3.
The SNMP community string acts like a password between the network
management system and the distributed SNMP clients (PTP 650 ODUs).
Only if the community string is configured correctly on all SNMP entities
can the flow of management information take place. By convention the
default value is set to public.
Enter the port that the SNMP agent is listening to for commands from a
management system.
Page
SNMP pages (for SNMPv1/2c)
77).
(Figure
86). Use this page to enter
(Table
88) and click Next.
6-72
Advertisement
Table of Contents
