Table of Contents
Advertisement
Chapter 6: Configuration and alignment
Confirm Installation Configuration page
Menu option: Installation
configuration of the unit.
Figure 65 Confirm Installation Configuration page (top and bottom of page shown)
Procedure:
•
To undo or correct any updates, click Back.
•
To confirm the updates and arm the installation, click Confirm Configuration and Reboot and
click OK to reboot the unit.
•
If IP Address, Subnet Mask or Gateway IP Address have been changed: reconfigure the local
management PC to use an IP address that is valid for the network. Refer to
management PC
on page 6-5.
•
If IP Address has been changed, use the new IP address to log into the unit.
(Figure
65). Use this page to review and confirm the updated wireless
Page
6-20
Installation menu
Configuring the
Advertisement
Table of Contents
