Table of Contents
Advertisement
Chapter 6: Configuration and alignment
Step 2: SNMP MIB-II System Objects (for SNMPv3)
Menu option: Management > SNMP. Part of the SNMP Wizard
Use this page to enter details of the SNMP managed node.
Figure 86 Step 2: SNMP MIB-II System Objects page (for SNMPv3)
Procedure:
•
Update the attributes
•
Click Next.
•
The next step depends upon which SNMP Security Mode was selected in the Step 1: SNMP
Configuration page:
If Web-based, go to
o
If MIB-based, go to
o
Table 88 Step 2: SNMP MIB-II System Objects attributes (for SNMPv3)
Attribute
Sys Contact
Sys Name
Sys Location
(Table
88).
Step 3: SNMP User Policy Configuration (for SNMPv3)
Confirm SNMP Configuration (for SNMPv3)
Meaning
The name of the contact person for this managed node, together with
information on how to contact this person.
An administratively-assigned name for this managed node. By
convention, this is the fully qualified domain name of the node.
The physical location of this node, for example Telephone closet, 3
floor.
Page
(Figure
86).
on page 6-70.
6-64
SNMP pages (for SNMPv3)
on page 6-65.
rd
Advertisement
Table of Contents
