Chapter 7: Operation
Diagnostics Plotter page
Menu option: System > Diagnostics Plotter
Use this page to monitor the performance of an operational PTP 650 link over time.
Figure 131 Diagnostic Plotter page
Procedure:
•
Select a diagnostic from the Diagnostics Selector drop-down list. These are the same as the
System Histogram attributes in the System Statistics page
•
Tick the required Trace Selection boxes: Max, Mean and Min.
•
Update the Page Refresh Period as required. The default period is 3600 seconds (1 hour). To
monitor the performance of a link in real time, select a much shorter period, for example 60
seconds.
•
Click Plot Selected Diagnostic. The selected diagnostic trace is displayed in the graph.
Maximum values are displayed in red, mean values are displayed in
values are displayed in blue.
(Figure
131).
(Table
Page
7-42
System statistics
109).
purple
and minimum