Table of Contents
Advertisement
Chapter 6: Configuration and alignment
Table 91 Step 5: SNMP Trap Configuration attributes (for SNMPv3)
Attribute
SNMP Enabled Traps
SNMP Trap Receiver 1 and SNMP Trap Receiver 2:
SNMP Trap Receiver
Enabled
SNMP Trap Internet
Address
SNMP Trap Port Number
SNMP Trap User Account
Confirm SNMP Configuration (for SNMPv3)
Menu option: Management > SNMP. Part of the SNMP Wizard
Use this page to review and confirm the updated SNMPv3 configuration of the unit.
Figure 90 Confirm SNMP Configuration page (for SNMPv3) (top and bottom of page shown)
Procedure:
•
To ensure that the changes take effect, click Confirm SNMP Configuration and Reboot. The unit
reboots and the changes take effect.
Meaning
Select the events that will generate SNMP traps.
Disabled: SNMP traps are not sent to the corresponding SNMP
Trap Receiver (1 or 2).
Enabled: SNMP traps are sent to the corresponding SNMP Trap
Receiver (1 or 2).
The IPv4 or IPv6 Address of the SNMP server (trap receiver). This is
normally the network management system, but it may be a
separate trap receiver.
The server port at which SNMP traps are received.
The user name (and associated protocols) to use when sending
SNMP traps to the server.
Page
6-70
SNMP pages (for SNMPv3)
(Figure
90).
Advertisement
Table of Contents
