Web Server - Cambium Networks PTP 650 Series User Manual

Chapter 1: Product description
DHCPv6
PTP 650 does not support address assignment using DHCPv6. The address of the management
agent must be configured statically.
Multicast listener discovery for IPv6
The PTP 650 management agent supports Multicast Listener Discovery version 1 (MLDv1) as
specified in RFC 2710.
PTP 650 does not support Multicast Listener Discovery version 2 (MLDv2).
Textual representation of IPv6 addresses
PTP 650 allows users to input text-based IP addresses in any valid format defined in RFC 5952. IPv6
addresses are automatically converted by PTP 650 to the preferred compressed form, apart from
those using the prefix length on the same line as the address, such as 2000::1/64.
Security
PTP 650 does not support IP security (IPsec).

Web server

The PTP 650 management agent contains a web server. The web server supports the HTTP and
HTTPS/TLS interfaces.
Web-based management offers a convenient way to manage the PTP 650 equipment from a locally
connected computer or from a network management workstation connected through a
management network, without requiring any special management software. The web-based
interfaces are the only interfaces supported for installation of PTP 650.
Web pages
The web-based management interfaces provide comprehensive web-based fault, configuration,
performance and security management functions organized into the following web-pages and
groups:
•
Home: The Home web-page reports Wireless Link Status and basic information needed to
identify the link. The Home page additionally lists all active alarm conditions.
•
Status: The Status web-page reports the detailed status of the PTP 650.
•
System: These web-pages are used for configuration management, including IP and Ethernet,
AES encryption keys, quality of service and software upgrade. The System pages additionally
provide detailed counters and diagnostic measurements used for performance management.
Page
1-25
System management