Table of Contents
Advertisement
Chapter 6: Configuration and alignment
Using the web interface
This section describes how to log into the PTP 650 web interface and use its menus.
Logging into the web interface
Use this procedure to log into the web interface as a system administrator.
Procedure:
1
Start the web browser from the management PC.
2
Type the IP address of the unit into the address bar. The factory default IP address is
169.254.1.1. Press ENTER. The web interface menu and System Summary page are displayed:
3
On the menu, click System. The login page is displayed with Password only (the default) or
with Username and Password (if identity-based user accounts have been enabled):
4
Enter Username (if requested) and Password (the default is blank) and click Login.
Page
6-7
Using the web interface
Advertisement
Table of Contents
