Chapter 7: Operation
Barring channels
To comply with FCC rules, bar any channels that may interfere with TDWR radars. This must be
done before the units are allowed to radiate on site. The system designer will have provided a list
of any affected channels, based on the instructions in
page 3-20.
Procedure:
•
Log into the master unit.
•
Select menu option System > Spectrum Management. The Spectrum Management page is
displayed.
•
Click on the appropriate channel center frequencies on the Local or Peer channel spectrum
plots. The example in
•
When the confirmation dialog is displayed, click OK.
Figure 123 Barring a channel
Figure 123
shows how to bar one channel (5822 MHz).
Page
Avoidance of weather radars (USA only)
7-31
Spectrum management
on