Chapter 8: Troubleshooting
This chapter contains procedures for identifying and correcting faults in a PTP 650 link. These
procedures can be performed either on a newly installed link, or on an operational link if
communication is lost, or after a lightning strike.
The following topics are described in this chapter:
•
Testing link end hardware
when it fails on startup, or after a lightning strike.
•
Testing the radio link
communication, or when it is unreliable, or when the data throughput rate is too low.
on page
8-2
describes how to test the link end hardware, either
on page
8-9
describes how to test the link when there is no radio
Page
8-1