Table of Contents
Advertisement
Chapter 7: Operation
Attribute
Interference
Threshold
Channel Bandwidth
(not configurable)
Interpreting the spectrum management plots
The Spectrum Management pages at the master and slave
graphical plots:
•
Local Receive Channel Spectrum
•
Peer Receive Channel Spectrum
A more detailed example of one of these plots is shown in
Figure 117 Example spectrum management plot
Note
For more information, select the Help hyperlink from the Spectrum Management
page.
Meaning
Spectrum Management uses the interference threshold to perform
instantaneous channel hops. If the measured interference on a channel
exceeds the specified threshold, then DSO will instruct the wireless to
immediately move to a better channel. If a better channel cannot be
found the PTP 650 Series will continue to use the current active channel.
(Default –85 dBm).
This shows the value of the variable channel bandwidth selected.
Page
(Figure 115
and
Figure
117.
7-23
Spectrum management
Figure
116) display two
Advertisement
Table of Contents
