Step 7: Enter Http And Telnet Settings - Cambium Networks PTP 650 Series User Manual

Chapter 6: Configuration and alignment

Step 7: Enter HTTP and Telnet Settings

Menu option: Security. Part of the Security Wizard
Use this page to configure network management of the PTP 650 using one or more of the
following methods: HTTPS, HTTP, Telnet or SNMP.
Figure 101 Step 7: Enter HTTP and Telnet Settings page
Caution
If HTTPS, HTTP, Telnet and SNMP are all disabled, management access will be
impossible until the unit is placed in recovery mode.
(Figure 101).
Page
6-83
Security menu