Chapter 2: System hardware
ODU mounting brackets
The integrated and connectorized mounting brackets
poles with diameters in the range 50 to 75 mm (2 to 3 inches). The extended mounting bracket
(Figure
9) is used for mounting an integrated or connectorized ODU on poles with a diameter of
either 90 mm (3.5 inches) or 115 mm (4.5 inches).
Before ordering ODU mounting brackets, be aware of the following:
•
Individual integrated ODUs are supplied without a mounting bracket
•
Individual connectorized ODUs are supplied with a connectorized mounting bracket
•
ODUs in kits are supplied with an integrated or connectorized bracket, as appropriate
If separate ODU mounting brackets are required, order them from Cambium Networks
Figure 9 ODU mounting brackets (integrated, connectorized and extended)
Table 5 ODU mounting bracket part numbers
Pole diameter
From
50 to 75 mm
(2 to 3 inches)
Either 90 mm (3.5 inches)
or 115 mm (4.5 inches)
ODU type
Cambium description
Integrated
PTP 650 Mounting Bracket
(integrated)
Connectorized
PTP 650 Mounting Bracket
(connectorized)
Integrated and
Extended Diameter Mast
connectorized
mounting kit 3.5" and 4.5"
Page
2-5
(Figure
9) are used to mount the ODU on
(Table
Outdoor unit (ODU)
2).
(Table
2).
(Table
3).
(Table
5).
Cambium part
number
N000065L031
N000065L032
N000065L030