Lan Settings - FLIR A3 F series User Manual

11 – Verifying camera operation (FLIR A3xx pt series)
T639350;a1
2 Click Restore in the Factory Backup and Restore section to reconfigure the file to
the settings sent from the factory. This file can not be modified or deleted, so it is
always available.
3 In the Customer Backup and Recovery section, make a backup of your final custom
settings.
4 In the Upload and Download section, download a copy to a different network loca-
tion for safe keeping.
11.3.6

LAN settings

As the final step in configuring the camera on the bench, you may want to insert a
new IP address appropriate for the local area network receiving the camera. Once
you are finished with this process you typically will no longer be able to access the
camera from the same PC used to see the default IP address.
1 Click LAN Settings. The screen below will be displayed.
T639352;a1
36
Publ. No. T559743 Rev. a601 – ENGLISH (EN) – April 26, 2012