Edge Recording - FLIR CM-6206-H1-I User And Installation Manual

Configuration and Operation
File Name

File Name – Enter a file name in the field, for example image.jpg. The uploaded image's file
name format is set in this section. Select one that meets your requirements.

Add date/time suffix (default setting)
File name: imageYYMMDD_HHNNSS_XX.jpg
Y: Year, M: Month, D: Day
H: Hour, N: Minute, S: Second
X: Sequence Number

Add sequence number suffix (no maximum value)
File name: imageXXXXXXX.jpg
X: Sequence Number

Add sequence number suffix (limited value)
File Name: imageXX.jpg
X: Sequence Number
The file name suffix ends at the number being set. For example, if the setting is up to "10," the
file name will start from 00, end at 10, and then start over again.

Overwrite
The original image in the FTP site will be overwritten by the new uploaded file with a static
filename.
Click SAVE after configuring the settings

Edge Recording

From the Edge Recording tab it is possible to configure the following screens:

SD Card
SD Card
You can locally record up to 128GB on a Class 10 microSDXC card. The SD Card page shows the
capacity information of the memory card and a recording list of all the recording files saved on the card.
You can also format the card and implement automatic recording cleanup on this page. To implement
microSDXC card recording, see Recording.
72

Network Share
Figure 59: SD Card Screen
CM-6206-H1-I User and Installation Guide

Recording
September 29, 2016