Leica 3D Disto User Manual page 86

3D Disto, Operation
9. Press to choose between different turn commands:
• Turn 90° right
• Turn 90° left
• Turn ?°: Enter the horizontal angle by which the 3D Disto should turn.
• Horizon: 3D Disto goes to 0% slope in horizontal position.
• Plumb up: This option can be used to plumb up a point by setting up the
3D Disto exactly over it. Just mark a cross on the floor. Ensure that the lines of
the cross are at exactly 90° to each other and long enough to be seen when
setting up the instrument above. Use the 90° markings on the 3D Disto socket
for centering.
Please note that there are vertical and horizontal deviations in the
movements. Do not use the turn commands for stake-out or align-
ment. Please work with the Tool Kit instead.
86