6.5
Addition and
subtraction after
measurement
step-by-step
3D Disto
, Operation
Addition and Subtraction
During and after measuring you can add or subtract selected elements.
The following values can be added:
•
Horizontal distances
•
Tie distances
•
Heights (in certain cases)
Area and volume results can be added or subtracted by using the memory function
in the calculator.
1. Select element by fingertip, stylus or
2. Press
or
for addition or subtraction. The corresponding symbol appears
in the status bar. The first selected line or area is highlighted with black bullet
symbol.
3. Select next element and press
close the sum and/or finish the adding/subtracting function.
/
.
or
for addition/subtraction again or
to
95