Leica 3D Disto User Manual page 143

Projector,
Import mode
step-by-step
3D Disto
, Software Applications
To layout further points select another point and press
10. Press to go back to the Aligner tool.
11. Press to save file, for example to export data.
Import a drawing, select a point and lay it out on an area.
1. Measure reference area and points as
described previously and choose Import
option.
2. File Manager opens. Select file and press
You can check the import file by pressing
To import points from a list, enter coordinates in a text editor and save
the file with extension CSV. Be sure that the format and the list sepa-
rator corresponds to Menu - Settings - Import/Export.
3. 3D Disto checks and prepares the file.
Avoid unnecessary data in the DXF file to be imported. There is no layer
selection and only points of lines are imported (not the lines). Only
2D-information is imported.
.
.
before import.
143