Leica 3D Disto User Manual page 120

3D Disto, Software Applications
Location Check
step-by-step
8. If Yes: Folder opens to choose next Secure Point. Proceed as described in 4. to
nd rd
7. for 2 and 3
If the first two Secure Points were measured successfully the 3D Disto
roughly turns to the next chosen Secure Point. You just have to do the
fine targeting and press
9. When you have measured three points successfully a pop-up shows OK.
Measure more Secure Points? Yes/No/Cancel.
10. Press Yes to continue and proceed as described in 4. to 7.
11. Press No to finish. Pop-up prompts, 3D Disto shift ok; Position: XXXm;
Height: XXXm; OK/Cancel. Accept with OK or Cancel to measure further
points.
12. If Relocation was not successful, pop-up prompts Out of tolerance! Measure
more Secure Points? Yes/No/Cancel. Go on as described in 4. to 11.
13. Press to close the application.
If the 3D Disto was unintentionally moved, for example got bumped, the geometry
of the measured points will no longer fit with that of the previously measured points.
Start a Location Check to sustain the current accuracy/geometry.
point.
.
120