Leica 3D Disto User Manual page 135

Room Scan,
Vertical scan step-
by-step
3D Disto
, Software Applications
1. Viewfinder opens to target and measure start point.
2. Pop-up prompts to choose scan orientation:
Perpendicular to Wall or Free.
• Perpendicular to Wall
1. 3D Disto measures the surface around the measured start point automatically.
Await the next pop-up.
2. Pop-up prompts to define measurement direc-
tion up/from ... to/down followed by spacing
of measurement points.
3. If you choose from ... to, Viewfinder opens to measure end point before spacing
can be defined. Press
4. 3D Disto starts scan at the start point. Proceed as described in "Room Scan, Hori-
zontal scan step-by-step", page 132 ff.
.
135