Leica 3D Disto User Manual page 21

Secure Points
3D Disto
, Technical Terms and Abbreviations
Secure Points link measurements to a coordinate system. These reference points
allow changing the 3D Disto's location or continuing measurements at a later time,
so that all measurements fit together perfectly.
3D Disto_026
3D Disto_027
Refer to "7.3 Location" for more information.
1. Name and place three to five self-adhesive
target marks on walls, ceiling or floor around
your working area.
2. Measure these target marks and save them as
Secure Points.
3. Move the 3D Disto or set it up "anywhere" at
a later time.
4. Measure the Secure Points again. 3D Disto
relocates itself and measurements can be
continued.
21