Workflow - Leica 3D Disto User Manual

3D Disto, Software Applications
7.5.1
Projector,
Start step-by-step

Workflow

1. Press Menu » Applications » Projector.
2. Pop-up appears Sketch is cleared!
Pop-up will only appear if a measurement file is still open.
3. Viewfinder opens to measure the reference area and other details the grid will
be projected onto.
3D Disto assumes the measured reference area as a flat surface.
Curved surfaces will lead to wrong measurements and layouts.
4. Measure your reference area and press
Ensure the 3D Disto will not be moved unintentionally, for example by
bumping. Otherwise all following measurement or grid points will no
longer fit with the geometry of the previous points. Start a Location
Check to sustain the actual accuracy/geometry.
5. When all points are measured, continue with
6. Pop-up prompts to choose between Grid or
Import mode.
Grid mode: Manual definition of grid to be laid
out.
to finish measurement.
.
138