3D Disto, Care and Transport
11.3
Lens and housing
of 3D Disto
Damp products
Cables and plugs
Cleaning and Drying
•
Blow dust off lens and housing.
•
Never touch the glass with your fingers.
•
Use only a clean, soft, lint-free cloth for cleaning. If necessary, moisten the cloth
with water or pure alcohol. Do not use other liquids; these may attack the
polymer components.
•
Dry the product, the transport container, the foam inserts and the accessories
at a temperature not greater than 40°C / 104°F and clean them.
•
Do not repack until everything is completely dry.
•
Always close the transport container when using in the field.
Keep plugs clean and dry. Blow away any dirt lodged in the plugs of the connecting
cables.
162