Leica 3D Disto User Manual page 43

Software update
3D Disto
, Description of the System
1. Press and connect the Control
Unit to the PC by Micro-USB cable.
Ensure the Control Unit battery is fully charged before starting the software
update to avoid data loss. Do not disconnect from PC before download has
finished. Please save and export your measurement data before starting
the software update.
2. If the Control Unit does not recognise the PC connection automatically
press or connect in the Menu settings.
3. If the connection works, start the internet browser and go to the MyWorld
homepage. Register your product by entering the equipment number.
4. Go to the MyProduct page, choose the Software tab and press Software
Update key. MyWorld automatically checks the firmware version on the Control
Unit and starts the download in case an update is needed. The process is a step-
by-step wizard guided process.
5. Disconnect the Control Unit from the PC and start the installation in Menu »
Device » Software » Update.
3D Disto_011
43