3D Disto, Operation
Addition and
subtraction during
measurement
step-by-step
4. The added/subtracted
elements get a
or
icon.
5. The sum is displayed in
the results window.
1. Press
, target and measure the first two points with
You have to measure two points before
cannot be added or subtracted.
2. Two points with a line connection appear in sketch area.
3. Press
or
for addition or subtraction. The corresponding symbol appears
in the status bar. The first selected line is highlighted with black bullet symbol.
4. Press
, target to measure a further point. Press
.
or
is active as points
.
96