Leica 3D Disto User Manual page 115

Parallel Line step-
by-step
3D Disto
, Software Applications
1. Start application in Menu » Applications » Tool Kit.
2. Press on the Toolbar.
3. Viewfinder opens. Target and measure start and end point of the reference line.
4. A pop-up prompts to enter parallel distance to the left or right of the reference
line. Press OK to confirm the entered value.
5. Viewfinder opens to roughly target layout point. Press
to indicate the exact position on the parallel.
All points have to be measured on the same surface.
6. Press to close Tool Kit.
. Laser point flashes
115