3.5
3D Disto system
software
Application
programs
Demo mode
3D Disto
, Description of the System
Software Concept
The 3D Disto software includes the central functions of the instrument:
•
Several languages are integrated into this software. The preferred operating
language can be chosen during the first setup or in the Setting menu.
•
The instrument has a restart function in case it does not react properly.
To restart the Control Unit press
•
To reset the software to the factory settings go to Menu, press Settings and
Reset to default.
•
To restart the sensor press
Several application programs are available for the instrument, supported by assistant
pop-ups that guide through the workflow. These applications can be tested in a
Demo mode or activated with license keys.
The available application programs can be tested by activating the Demo mode. This
provides full software performance for 40 working hours. A pop-up reminds the user
when the Demo mode expires.
To enable the application programs in Demo mode, carry out the following steps:
1. Press Menu » Applications » Demo.
2. All application programs are listed in the Menu and marked with
mode runs out.
for ten seconds.
for five seconds.
until Demo
39