Leica 3D Disto User Manual page 88

3D Disto, Operation
To measure for example a room's dimension, carry out the following steps:
1. Start-up the system as described in "5.1 Start-up Procedure".
2. The following screen
appears:
3. To target the first point, for example a corner, press
keys or another method as described in "6.2 Viewfinder", to move the laser point
to the desired position.
While targeting ensure the laser beam is not split along corners or
edges. Otherwise this could lead to wrong measurements.
If laser point becomes a line due to an acute target angle to a wall the
system measures with the centre of the line.
88
and use the arrow