Leica 3D Disto User Manual page 61

3D Disto
, Instrument Setup
12. To work with a cable connection to 3D Disto plug in USB cable and press
It is recommended to plug in the USB cable before turning on the
3D Disto, otherwise the instrument starts self-levelling procedure
again if moved.
Do not extend the USB cable with an adapter and only use the Leica
Geosystems cable delivered in the container.
To work with WLAN press
To transfer data to or from a PC press
more information.
If connections do not work press Menu » Device » Connect 3D Disto
and activate connection manually, either to PC or to Control Unit by
WLAN or cable.
.
. Refer to "5.4.4 Data Transfer" for
.
61