Rm100 Remote Control - Leica 3D Disto User Manual

4.2
Description
Targeting
procedure
3D Disto
, User Interface

RM100 Remote Control

The RM100 Remote Control (IR) has five buttons that allow turning the 3D Disto and
executing a distance measurement or point projection, depending on the application
program running.
The RM100 Remote Control does not support the Tool Kit applications.
1. Rough targeting: hold
pressed.
2. Fine targeting: short tap on
single steps.
3. Measure: Press
The red LED at the top of the RM100 Remote Control will flash each time a button is
pressed, indicating the remote is transmitting to the 3D Disto.
/ / /
/ /
.
to turn the 3D Disto as long as key is
/ to turn the 3D Disto by small
55