Test Card Functional Areas - Leica GLOW800 User Manual

WARNING
Risk of infection due to unsterile GLOW800 test card
Do not use the GLOW800 test card in the sterile field.
X
Use only in non-sterile environment.
X
Check the microscope illumination in non-sterile
X
environment only.
Take care to ensure the precise parfocal setting of the
X
ARveo 8. Follow the instructions on parfocal setup.
Adjust the working distance (WD) to 325 mm.
X
Position the microscope in a small but sufficient angle over the
X
test card to avoid reflexes.
Follow the instructions on parfocal setup.
X
Get in focus by repositioning the microscope at highest
X
magnification (Do not change the working distance setting).
After positioning and focusing adjust the magnification to 3.0×.
X
Move the test card into the center of the field of view.
X
Switch to GLOW800 mode by pressing the GLOW800 button on
X
the handle.
Adjust the fluorescence excitation to 50 %.
X
The GLOW800 test card can now be observed in the eyepiece or
X
in white light fluorescence on the optional monitor.
1 Microscope optics carrier
2 Test card
Eyepiece view
Appearance of the test card in white light observation:
Holes in the color squares will allow to check the adjustment of the
fluorescence and white light image.
9.4
Tests in white light fluorescence observation mode
Check for the proper adjustment of the fluorescence image with
X
the white light image.
All bright fluorescence dots have to fit precisely into the holes
of the color squares (A–D).
A
B
GLOW800 / Ref. 10 748 652 / Version 01
Check and adjust the illumination and functions
Standard
Leica GLOW800
10 746 513-xx
0 1 2 3 4 5 6 7
!
Please read the Leica
GLOW800 user manual!

Test card functional areas

Leica GLOW800
10 746 513-xx
0 1 2 3
!
Please read the Leica
GLOW800 user manual!
Leica GLOW800
10 746 513-xx
0 1 2 3 4
!
Please read the Leica
GLOW800 user manual!
8 9
C
4 5 6 7 8 9
D
E
5 6 7 8 9
27