GE G60 Instruction Manual page 469

APPENDIX E
Table E–1: DNP V3.00 DEVICE PROFILE (Sheet 3 of 3)
Reports Binary Input Change Events when no
specific variation requested:
Never
Only time-tagged
Only non-time-tagged
Configurable
Sends Unsolicited Responses:
Never
Configurable
Only certain objects
Sometimes (attach explanation)
ENABLE/DISABLE unsolicited Function
codes supported
Default Counter Object/Variation:
No Counters Reported
Configurable (attach explanation)
Default Object:
Default Variation: 1
Point-by-point list attached
Sends Multi-Fragment Responses:
Yes
No
GE Multilin
Reports time-tagged Binary Input Change Events when no
specific variation requested:
Sends Static Data in Unsolicited Responses:
No other options are permitted.
Counters Roll Over at:
20
G60 Generator Management Relay
E.1 DEVICE PROFILE DOCUMENT
Never
Binary Input Change With Time
Binary Input Change With Relative Time
Configurable (attach explanation)
Never
When Device Restarts
When Status Flags Change
No Counters Reported
Configurable (attach explanation)
16 Bits (Counter 8)
32 Bits (Counters 0 to 7, 9)
Other Value: _____
Point-by-point list attached
E
E-3