5.5 GROUPED ELEMENTS
5.5GROUPED ELEMENTS
Each protection element can be assigned up to six different sets of settings according to Setting Group designations 1 to 6.
The performance of these elements is defined by the active Setting Group at a given time. Multiple setting groups allow the
user to conveniently change protection settings for different operating situations (e.g. altered power system configuration,
season of the year). The active setting group can be preset or selected via the
ments section later in this chapter). See also the Introduction to Elements section at the beginning of this chapter.
5
PATH: SETTINGS
GROUPED ELEMENTS
SETTING GROUP 1
Each of the six setting group menus is identical.
no other group is active (see the Control Elements section for additional details).
5-82
SETTING GROUP 1(6)
DISTANCE
POWER SWING
MESSAGE
DETECT
STATOR
MESSAGE
DIFFERENTIAL
PHASE CURRENT
MESSAGE
NEUTRAL CURRENT
MESSAGE
GROUND CURRENT
MESSAGE
NEGATIVE SEQUENCE
MESSAGE
CURRENT
GENERATOR
MESSAGE
UNBALANCE
SPLIT PHASE
MESSAGE
VOLTAGE ELEMENTS
MESSAGE
LOSS OF
MESSAGE
EXCITATION
ACCIDENTAL
MESSAGE
ENERGIZATION
SENSITIVE
MESSAGE
DIRECTIONAL POWER
STATOR
MESSAGE
GROUND
SETTING GROUP 1
G60 Generator Management Relay
SETTING GROUPS
See page 5–83.
See page 5–90.
See page 5–98.
See page 5–101.
See page 5–111.
See page 5–118.
See page 5–125.
See page 5–128.
See page 5–130.
See page 5–134.
See page 5–144.
See page 5-146.
See page 5-148.
See page 5-151.
(the default active group) automatically becomes active if
5 SETTINGS
5.5.1 OVERVIEW
menu (see the Control Ele-
5.5.2 SETTING GROUP
GE Multilin