Selector Switches; Flex States; Ethernet - GE G60 Instruction Manual

6.2 STATUS
PATH: ACTUAL VALUES

SELECTOR SWITCHES

6
The display shows both the current position and the full range. The current position only (an integer from 0 through 7) is the
actual value.
PATH: ACTUAL VALUES

FLEX STATES

There are 256 FlexState bits available. The second line value indicates the state of the given FlexState bit.
PATH: ACTUAL VALUES

ETHERNET

These values indicate the status of the primary and secondary Ethernet links.
6-6
STATUS SELECTOR SWITCHES
SELECTOR SWITCH 1
POSITION: 0/7
SELECTOR SWITCH 2
MESSAGE
POSITION: 0/7
STATUS FLEX STATES
PARAM 1: Off
Off
PARAM 2: Off
MESSAGE
Off
PARAM 256: Off
MESSAGE
Off
STATUS ETHERNET
ETHERNET PRI LINK
STATUS: OK
ETHERNET SEC LINK
MESSAGE
STATUS: OK
G60 Generator Management Relay
Range: Current Position / 7
Range: Current Position / 7
Range: Off, On
Range: Off, On
↓
Range: Off, On
Range: Fail, OK
Range: Fail, OK
6 ACTUAL VALUES
6.2.9 SELECTOR SWITCHES
6.2.10 FLEX STATES
6.2.11 ETHERNET
GE Multilin