Removing And Installing Pressure Plate; Removing And Installing Driven Plate - Skoda Octavia 1996 Service Manual

OCTAVIA
Edition 12.99
S00.5105.52.20
Crank Assembly
Removing and installing pressure
plate
Special tools, testers and aids required
♦ Torque wrench 40...200 Nm
(e.g. V.A.G 1332)
♦ Counterholder MP 1-221
K - Insert counterholder MP 1-221 into hole on
cylinder block and bolt on at pressure plate.
- Slacken bolts for pressure plate.
Note:
Replace bolts for pressure plate.
- Tighten bolts to 60 Nm and torque a further
¼ turn (90°).
Removing and installing driven
plate
Special tools, testers and aids required
♦ Torque wrench 5...50 Nm
(e.g. V.A.G 1331)
♦ Torque wrench 40...200 Nm
(e.g. V.A.G 1332)
♦ Counterholder MP 1-221
♦ Depth gauge
Removing
K - Attach counterholder MP 1-221 to the driven
plate with hexagon bolt M8 x 45. Fit two M10
hexagon nuts -1- between counterholder and
driven plate.
- Unscrew bolts for driven plate.
13
------------ 13-15 ------------