Skoda Octavia 1996 Service Manual page 93

OCTAVIA
Edition 05.97
S00.5105.51.20
Cooling System
Models with air conditioning
- Pull out radiator and condenser slightly.
K - Remove retaining clip -arrow- for refrigerant
pipe.
Continued for all models
- Remove fan shroud (4 bolts).
Note:
When removing and installing the fan shroud,
ensure that the radiator fins are not damaged.
- Carefully lift radiator down and out.
Installing
Installation is carried out in the reverse order;
pay attention to the following points:
K - Tighten thermoswitch -1- to 35 Nm.
- Fit on mounts -2- and -3- at the radiator as
shown.
- Tighten the bolts for attaching the fan shroud
and radiator mounts to 10 Nm.
- On models with air conditioning, tighten the
bolts for attaching condenser and bracket for
refrigerant pipes to 10 Nm.
- Replace O-rings in the connection fittings of
the coolant hoses.
- Screw in coolant drain plug.
- Pour in coolant ⇒ page 19-3.
- Install headlights:
⇒ Electrical System; Repair Group 94; Re-
moving and installing headlights
- Electrical connections and routing:
⇒ Current Flow Diagrams, Electrical Fault
Finding and Fitting Locations binder
19
¡ ¢ £
------------ ------------