Skoda Octavia 1996 Service Manual page 94

19
¡ ¢ £
------------ ------------
Cooling System
Removing and installing coolant
pump
Special tools, testers and aids required
♦ Torque wrench 5...50 Nm
(e.g. V.A.G 1331)
Removing
K - Remove engine trim panel; take protective
cover off the nuts -arrows- for this step.
- Drain coolant ⇒ page 19-2.
K - Remove noise insulation panel on right
-arrows- in bottom half of illustration.
- Remove ribbed V-belt ⇒ page 13-1.
- Remove tensioning device for ribbed V-belt
⇒ page 13-1.
- Take off top and middle toothed belt guard
⇒ page 13-5.
- Position crankshaft to TDC of cylinder 1
⇒ page 15-9.
- Take off toothed belt at camshaft sprocket
⇒ page 13-6.
OCTAVIA
Edition 12.99
S00.5105.52.20