15
¡ ¢ £ ¤
------------
------------
Cylinder Head/Valve Gear
K -
Use fine grinding paste to grind in valve/valve
seat -arrows- so that a proper contact pattern
is achieved.
-
Inspect valve for leaks.
The inspection can be carried out with water
colour (proper contact pattern around the entire
circumference) or by filling fuel into the
combustion chamber (no fuel should flow out at
the valve seat).
Note:
After installing cylinder head, inspect hydraulic
bucket tappets ⇒ page 15-19.
OCTAVIA
Edition 05.97
S00.5105.51.20