Skoda Octavia 1996 Service Manual page 21

OCTAVIA
Edition 05.01
S00.5105.53.20
Removing and Installing Engine
- Install ribbed V-belt ⇒ page 13-4.
- Install coolant hoses ⇒ page 19-1.
- Fill system with coolant ⇒ page 19-2.
- Do not re-use drained coolant if cylinder
block, cylinder head, radiator or heat ex-
changer has been replaced.
- Place engine connecting loom in cable duct
and plug together with 10-pin plug connec-
tion.
- Plug in 28-pin plug connection at engine con-
trol unit -J361.
- Install plenum chamber cover.
⇒ Body Fitting Work; Repair Group 66; Trim
Panels
- Install wiper arms.
⇒ Electrical System; Repair Group 92; Wind-
screen Wiper System
- Electrical connections and routing of cables:
⇒ Current Flow Diagrams, Electrical Fault
Finding and Fitting Locations binder
- Adjust throttle cable ⇒ page 20-13.
- Install engine trim panel.
- Inspect engine oil level before starting en-
gine ⇒ page 17-9.
Note:
If the earth strap of the battery is disconnected
and re-connected, it is necessary to carry out
additional operations ⇒ Electrical System; Re-
pair Group 27.
10
------------ 10-13 ------------