Skoda Octavia 1996 Service Manual page 20

10
------------ 10-12 ------------
Removing and Installing Engine
K - Attach intermediate plate to sealing flange
and push onto the dowel sleeves -arrows-.
Models fitted with manual gearbox
- Apply a thin film of grease G 000 100 to the
splines of the gearbox input shaft.
- Inspect centering of clutch plate, if neces-
sary.
- Install slave cylinder of hydraulic clutch:
⇒ 5-Speed Manual Gearbox 02K; Repair
Group 30; Servicing clutch mechanism.
- Install shift mechanism:
⇒ 5-Speed Manual Gearbox 02K; Repair
Group 34; Servicing shift mechanism.
- Adjust shift mechanism:
⇒ 5-Speed Manual Gearbox 02K; Repair
Group 34; Adjusting shift mechanism.
Models fitted with automatic gearbox
- Use only nuts approved in the Parts List for
attaching the torque converter to the driven
plate.
Models fitted with air conditioning
- Install AC compressor:
⇒ Heating, Air Conditioning; Repair Group 87;
Air Conditioning; Removing and installing
compressor at bracket.
Continued for all models
- Install power steering hydraulic pump:
⇒ Running Gear; Repair Group 48; Remov-
ing and installing power steering hydraulic
pump.
- Install drive shafts:
⇒ Running Gear; Repair Group 40; Servicing
front suspension; Removing and installing
drive shaft.
- Install front exhaust pipe and align exhaust
system free of stress ⇒ page 26-2.
- Align engine/gearbox mounting ⇒ page 10-
15.
OCTAVIA
Edition 05.01
S00.5105.53.20