Skoda Octavia 1996 Service Manual page 67

OCTAVIA
Edition 05.01
S00.5105.53.20
     

Cylinder Head/Valve Gear
Removing and
♦ Torque wrench
♦ Counterholder MP 1-216
Removing
- Remove top part of toothed belt guard.
- Slacken camshaft sprocket (use counter-
holder MP 1-216).
K - Position camshaft sprocket to TDC marking
of cylinder 1 by turning at the crankshaft.
Marking on camshaft sprocket must be
aligned with arrow on toothed belt guard.
- Slacken tensioning pulley and take off
toothed belt.
- Remove top part of intake manifold and cyl-
inder head cover ⇒ page 15-4 and 15-6, re-
spectively.
- Remove camshaft sprocket.
- Take parallel key out of camshaft.
- First of all remove bearing caps 1, 3 and 5,
then slacken bearing cap 2 and 4 alternately
diagonally across.
¢ £ ¤ ¥ ¥ ¡
¡ ¦
  !  "    #
    
t t and
¢ © ¤  £
§ ¤ ¨
 "  #
"  $ %
15
------------ 15-17.2 ------------