Disassembling And Assembling Oil Filter Holder - Skoda Octavia 1996 Service Manual

17

Disassembling and assembling oil filter holder

1 - Screw plug
2 - Seal
3 - Spring
♦ for 0.4 MPa pressure relief valve
4 - Piston
♦ for pressure relief valve
5 - Gasket
♦ replace
6 - Oil retention valve
♦ tightening torque 8 Nm
♦ integrated in oil filter holder
7 - Seal
¡ ¢ £
♦ push on as far as of collar of cap
-item 8-
------------ ------------
Lubrication System
8 - Cap
9 - Locking clasp
10 - Screw plug, 15 Nm
11 - Seal
♦ cut open and replace if leaking
12 - 0.14 MPa oil pressure switch -F1-,
25 Nm
♦ black
♦ testing ⇒ page 17-5
13 - Seal
♦ cut open and replace if leaking
14 - Oil filter holder
15 - 15 Nm + torque a further 1/4 turn (90°)
♦ replace
16 - Gasket
♦ replace
♦ insert into lugs at oil cooler
17 - Oil cooler
♦ ensure clearance to surrounding com-
ponents
♦ pay attention to Note ⇒ page 17-1
18 - 25 Nm
19 - Oil filter
♦ use tensioning strap for slackening
♦ tighten by hand
♦ pay attention to installation instructions
on oil filter
OCTAVIA
Edition 05.01
S00.5105.53.20